jdsu 2213-75TSLKTB complies with any precautions found in the shipping container. All items should be carefully unpacked and thoroughly checked for possible damage which occurred during shipment. The circuit board should be checked for damaged parts, printed circuit board damage, thermal damage and other visible contamination.
All claims arising from shipping damage shall be submitted to the carrier, and a full report submitted shall be sent to the Customer Service Department of GE Fanuc Embedded Systems with a request for: recommendations on the disposal of damaged items. Warning: Some component products assembled on GE Fanuc embedded systems may be sensitive to electrostatic discharge and may cause damage to the circuit board which is subjected to high energy electrostatic fields.
When the board is placed on the board configuration table, etc., it is recommended to insert conductive material underneath the board to provide conductive shunt. Unused circuit boards should be stored in the same location as the protective boxes used when transported. The VMIVME-7807/VME-7807RC is system run tested and comes with factory configured jumpers and switches. Figure 1-1 shows the physical positions of the switches, jumpers, and connectors of the SBC. Figure 1-1 shows the definitions of the switches, jumpers, and connectors of the SBC. Table 1-4 describes the definitions of the switches, jumpers, and connectors of the SBC. Note that the VMIVME-7807/VME-7807RC provides a PMC field designated as PMC1
There are no reviews yet.