ABB GFD563A102 3BHE046836R0102 Central controller module
The DSCA190V 57310001-PK Distributed control card connects signal cables and excitation current cables (except TIDALFLUX) only when the power is off. Equipment must be grounded in accordance with regulations to protect personnel from electric shocks. For equipment used in hazardous areas, additional safety notes apply; Please refer to Ex documentation and be sure to comply with local occupational health and safety regulations.
The electrical components of the measuring device should only be operated by properly trained personnel. Connection diagram for flow sensors, field housings If a shielded magnetic field current cable is used, the shield layer must not be connected to the signal converter. The outer shielding of the signal cable A or B in the signal converter housing eliminates the terminal by strain. Bending radius of signal and excitation current cables: ≥ 50 mm /2 inches below is a schematic diagram. The location of the electrical connection terminals may vary depending on the housing type.
Equipment must be grounded in accordance with regulations to protect personnel from electric shocks. If a shielded field current cable is used, the shield layer must not be connected to the signal converter. The external shielding of the signal cable is through multiple shielding lines.
Bending radius of signal and excitation current cables: ≥ 50 mm /2 inches below is a schematic diagram. The location of the electrical connection terminals may vary depending on the housing type.
ABB GFD563A102 3BHE046836R0102 Central controller module
There are no reviews yet.