GE DL-1200 RTU channel contact card
The scan set on the GE DL-1200 RTU channel contact card host does not work properly during the first operation. Scan Settings after entering the RUN mode.
They did for subsequent scans. After downloading the new hardware configuration and logic, restarting the power supply may require resuming FANUC I/O operations. Use a similar performance controller in the FANUC I/O network.
If the primary or secondary controller is in an RX3i system, the other controllers should be RX3i or Series 90-30 CPU374. Including the FANUC I/O slave device may cause the slave device operation to fail.
There are no reviews yet.