The IC670CHS001 is a terminal block module in the Field Control family, formerly manufactured by GE Fanuc and now manufactured by Emerson Automation. The module is equipped with a barrier type terminal plate that accommodates signal lines to and from electrical loads and signaling devices. It provides modular connectivity as the module allows managed I/O modules to be removed and inserted without removing existing wiring connections
The IC670CHS001 also provides backplane communication, as the module is embedded with connectors that connect to adjacent terminal board modules. The terminal board module is capable of accommodating up to two (2) modules, supporting both discrete I/O and analog I/O modules.
The IC670CHS001 has a total of 37 end points. Each terminal can accommodate up to two (2) wires in the size range #14 (2.1 mm2) to AWG #22 (0.35 mm2). The applicable wire insulation class is 90 degrees Celsius, while the recommended tightening torque is 8 inch-pounds. For ground terminal wiring, the applicable wire size is AWG #14(average 2.1mm2 cross section) and must not exceed 4 inches or 10.16 cm in length.
There are no reviews yet.