Honeywell 57 5704F Control System Key 05701-a-0550
An extraction tool is used in conjunction with the extraction slot, just below the SELECT push-button, to remove the card from the rack. The extraction tool is provided as part of the key kit (05701-A-0550) supplied with each rack assembly.
The extraction tool is provided as part of the key kit (05701-A-0550) supplied with each rack assembly.
The 5704F Series Control System is part of the System 57 family and is designed to monitor field mounted industrial fire detectors. The principal features of the system are:
1: Provides up to 60 loops of fire detection in a standard 19″ sub-rack using a 3U format.
2：Provides up to 28 loops of fire detection in a half 19″ sub-rack using a 6U format.
3：Racking available for both front and rear access field wiring.
4：Fire and Gas cards can be freely mixed in the same rack.
5：Simple field connections for wire up to 2.5mm² (14 AWG).
6：Four loop inputs and two switched outputs per one inch wide card.
7：Inputs compatible with flame, smoke and heat detectors, and manual call points.
8：Fault monitoring on all fire inputs and switched output circuits.
9：Configurable change-over relay output options per card.
10：Electronic adjustment of all operating parameters.
11：Cards removable without disturbing other wiring.
12：Multi-alarm mode for master, zone and voted alarms.
13：Remote acknowledge, reset and silence inputs per card.
14：Easy to operate using dedicated Fire Status Panel.
15：Earth leakage fault detection.
16：EMC Compliant.
Honeywell CPCHAS-0001 Chassis for redundant or non-redundant Controller (Safety Manager)
Honeywell CC-PUIO01 51454205-175 Universal input/output module
Honeywell Security Manager FC-QPP-0001 processor unit
There are no reviews yet.