UNIOP TCM08A card for communication industry
Insert the VMIVME-7807 or VME-7807RC into the system controller or peripheral slot in the VME chassis.
Use ejector handle to secure plate in place. 3. All required peripherals VMIAC-0586 /ACC-0586RC or VMIAC-0590 /ACC-0590RC Rear Transition Module (RTM) can be accessed from front panel or rear I/O.
Each connector is clearly marked on the front panel, and detailed pin instructions are in Appendix A. 4. 5.VMIVME-7807/VME-7807RC has optional CompactFlash disk board members. For more information about setup, see Chapter 3. 6. If an external drive module is installed, you must use the BIOS setup program to: configure the drive type.
See Appendix B to configure the system correctly. 7. If a driver module exists, install the driver according to the OS manufacturer’s instructions. The VMIVME-7807/VME-7807RC has many configuration options for the onboard BIOS setup program.
These options are saved in special non-volatile files of the battery-supported memory chips, collectively referred to as the ‘CMOS’ configuration of the circuit board. CMOS configurations control many of the details related to the circuit from the moment power is applied to the hardware behavior.
There are no reviews yet.